Certified Bumper and Cladding Coat Adhesion Primer – Light Gray, Quart – Urethane Supply Company

Urethane Supply Company | Bumper and Cladding Coat Adhesion Primer – Light Gray, Quart | 3601-4

Product Description

Bumper and Cladding Adhesion Primer is an advanced, solvent-based coating designed to permanently stick to the bumpers, side cladding, and trim found on many of today’s cars, trucks, and SUV’s. As everyone knows, most bumpers are made from plastics that are very difficult to get anything to stick to. Bumper and Cladding Adhesion Primer WILL stick to raw TPO and polypropylene. Once the primer is on, your basecoat-clearcoat will stick.

Key Features

• Solvent-based coating
• Permanently sticks to bumpers, side cladding, and trim
• Sticks to raw TPO and polypropylene
• Basecoat-clearcoat will stick once primer is on

Applications

• Bumpers
• Side cladding
• Trim

Benefits

• Permanently sticks to bumpers, side cladding, and trim
• Sticks to raw TPO and polypropylene
• Basecoat-clearcoat will stick once primer is on

Usage Instructions

1. Prepare the surface by removing all dirt, grease, and wax.
2. Apply a thin coat of Bumper and Cladding Adhesion Primer to the surface.
3. Allow the primer to dry for 24 hours.
4. Apply the basecoat-clearcoat of your choice.

Warnings

• This product is flammable. Keep away from heat and open flames.
• Wear gloves and eye protection when using this product.
• Avoid contact with skin and eyes.
• If product is ingested, seek medical attention immediately.

Storage

Store in a cool, dry place.

Caution

This product is hazardous. Read and understand the product label before using.

Disclaimer

The information provided on this website is for informational purposes only and should not be used to diagnose or treat any medical condition. Please consult with a physician or other healthcare professional if you have any questions about your health.