Best Choice F.A.S.E – FASE – TE1000/0.33UF/400 – 0.33UF 1000VAC Stainless Steel Radial Crossover Capacitor.

F.A.S.E – FASE – TE1000/0.33UF/400 – 0.33UF 1000VAC Stainless Steel Radial Crossover Capacitor.Non-polar capacitors can be connected to a power supply in any direction; their overall capacitance has no impact on the reversal of polarity, so they can be used interchangeably in both AC and DC systems. This capacitor has a lower AC voltage rating compared to its DC voltage rating because the way AC voltage fluctuates causes additional stress on the capacitor’s dielectric material.Type: Non-Polarized MTP Film CapacitorConfiguration: Tubular RadialVoltage Rating: TE 1000 VAC, TS 400VACCapacitance: 0.33 uF Tolerance: +50/-10%Dimensions: 0.675″ (17.2mm) x 1.3″ (33.3mm) LengthShape: Round TubularLead Spacing: Radial Leads 6.6mmEnclosure: Hermetically Sealed Stainless SteelApplications: Crossover networks and/or used to eliminate DC signals, reduce noise, and filter. Excellent replacment for paper/wax capacitors in tube radios. Also Telecommunications instruments, industrial electroncis and electronics equipment.New Old StockIn the context of capacitors, “TS voltage” refers to the “temperature-sensitive voltage,” which is the maximum voltage a capacitor can safely handle at a specific elevated temperature, usually considered the “derating temperature” where the rated voltage needs to be reduced due to increased heat. “TE voltage” on a capacitor typically refers to the “rated voltage” which is the maximum voltage that can be safely applied across the capacitor without damaging it; it’s usually printed directly on the capacitor body and represents the safe operating limit.