Get Yours Electroswitch – OAK INDUSTRIES – LCE1N-2G09-36-3 Mechanical Encoder, Rotary, 700 Series.

Electroswitch – OAK INDUSTRIES – LCE1N-2G09-36-3 Mechanical Encoder, Rotary, 700 Series.Electroswitch Electronic Products acquired OakGrigsby. A OakGrigsby 700 series mechanical encoder works by using a rotating shaft with physical contacts to switch electrical circuits. When the shaft is turned, internal wipers or brushes make and break contact with a series of conductive pads on a circuit board. This action generates a sequence of electrical pulses that are sent to a control system, which can then interpret them to determine rotational direction, position, and speed. Manual 2 Bit, 9-cycle, 36-Position with detents.Gray Code.Housing Material: Plastic, Gray.Operating Temperature: -40C to 85CMount: Panel, Threaded-Bushing.Rotation Life: 50,000 Cycles.Max Operating Speed: 30 RPMDimensions: 0.890″ (22.6mm) long x 0.830″ (21.0 mm) wide plus 3 PC leads x 0.336″ (8.5mm) high. Bushing length: (3/3-32), 6.3mm long. Shaft: 0.250″ (6.35mm) D x 0.500″ (12.7mm) long.Note: Marked OAK 700. (0.830″ x 0.343″).700 encoderAdditional Information: https://www.electro-nc.com/oak/p0710.pdfNew Old Stock. Made in USA